Filling Instructions for Table Top Lighters

 

Watch our instructions video below! 

1. Please use Butane Gas, not Lighter Fluid
2. Make sure no open flames are near
3. Adjust flame height to low setting using the flame adjustor
4. Bleed the fuel tank by pressing down on the lighter refill valve until hissing stops
5. Shake refill can to check for butane gas
6. Hold both the refill can and the lighter upside down in each hand
7. Push refill nozzle firmly, and all the way into the refill valve
8. Fuel in position for 15-20 seconds
9. Wait until lighter reaches room temperature before igniting (approx: 5-10 min)
10. Reset flame height from low flame to desired setting

For further assistance, please email customerservice@edie-parker.com